Maintenance - Gardena ClassicCut Li Betriebsanleitung

2. Slide the safety interlock
start lever (9) towards the handle
The battery shear starts and the battery charge
status indication (P)
3. Release the safety interlock
1.5.1.2 With telescopic handle [ Fig. O6 ]:
When the telescopic handle is assembled, the safety
interlock and the start lever on the battery shear are
without function.
1. Assemble the telescopic handle.
2. Remove the protective cover

2. MAINTENANCE

DANGER!
Cutting injury due to the blade!
Risk of cut injury due to accidental starting.
v Use gloves.
v Wait for the blade to stop.
v Slide the protective cover over the blade.
18
9884-20.960.01.indb 18 9884-20.960.01.indb 18
(8)
forward and pull the
(4) .
is displayed for 5 seconds.
(8) .
(7) (6)
of the blade
ß
3. Hold the handle
4h
slide the safety interlock
handle forward and pull the start lever
the telescopic handle.
The battery shear starts and the battery charge
status indication (P)
4. Release the safety interlock
1.5.2 To stop the battery shear:
1. Release the start lever
The battery shear stops.
2. Wait for the blade to stop
3. Slide the protective cover
.
2.1 To clean the battery shear:
DANGER!
Risk of injury!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with
a water jet (in particular high-pressure water
jet).
on the telescopic handle,
ß on the telescopic
8h
ß on
9h
is displayed for 5 seconds.
ß .
8h
ß
.
9h
(7) over the blade (6)
28.07.22 11:42 28.07.22 11:42
.