Operation; Maintenance; Storage - Gardena 19000 Betriebsanleitung

To install the Gateway:
6 4 5 6

4. OPERATION

Operation with the
GARDENA smart App:
Settings of the Gateway:
Factory Reset:
7

5. MAINTENANCE

To clean the Gateway:

6. STORAGE

To put into storage:
Disposal:
(in accordance with
RL2012/19/EC):
10
An Internet connection is required for installation of the gateway.
The Gateway can be connected to the Internet via LAN or WLAN.
1. Insert the plug­in power supply into a mains socket.
2. Insert the power supply cable into the port
3. For LAN connection:
Insert the Ethernet cable into the Ethernet port
4. Insert the other end of the Ethernet cable into the corresponding
port on the router.
5. (Available as an option from the Service team in the event that
the wireless range of the internal antennas is not sufficient).
Screw the external short­range wireless antennas onto the two
(6)
connectors .
The smart System is operated by the GARDENA smart App.
The GARDENA smart App can be downloaded from the Apple App
Store or the Google Play Store.
– Setting up WLAN
– Set up external short­range wireless antennas
The smart Gateway will be reset to the factory settings.
v Push the factory reset button
No caustic / abrasive cleaning agents should be used.
v Clean Gateway with a damp cloth (do not use solvent).
The unit must be stowed away from children.
v Do not stow the unit outdoors if not in use.
The unit must not be added to usual household waste.
Refer to local environmental laws for discarding.
v Important: Make sure that the unit is discarded through your
municipal recycling collection centre.
(4) of the gateway.
(5) of the gateway.
(7) .