Risk Of Injury - Gardena ClassicCut Li Betriebsanleitung

Battery charge status indication
(L1) (L2) (L3)
, and light
(L1) (L2)
and light
(L1)
lights
(L1)
blinks
If the LED (L1) blinks, the battery must be charged.
(Wp)
If the error LED is lighting or blinking,
see 4. TROUBLESHOOTING.
1.3 To adjust the handle
(only for ComfortCut [ Fig. O3 ]:
The handle can be adjusted in 5 steps to suit
individual needs.
1. Push the elbow joint
(4)
the handle to the desired angle.
(4)
2. Let the handle
Make sure that the handle is engaged.
1.4 To change the blade [ Fig. O4 ]:
Only the GARDENA blade may be used.
• GARDENA Grass and
Boxwood blade
• GARDENA Shrub blade
9884-20.960.01.indb 17 9884-20.960.01.indb 17
Battery charge status
67 – 100 % charged
34 – 66 % charged
11 – 33 % charged
0 – 10 % charged
(3)
on both sides and adjust
engage at the desired angle.
Art. 9862
Art. 9863
1. Push the lock buttons
same time and remove the blade
2. Put the other blade on until the connection
audibly engages.
Make sure that the blade is engaged.
1.5 To start / to stop the battery shear
[ Fig. O5 ]:
DANGER!

Risk of injury!

Risk of injury if the product does not stop when
the start lever is released.
v Do not bypass the safety devices or switches.
v For example do not attach the start lever to
the handle.
1.5.1 To start the battery shear:
The product is provided with a safety device
(start lever and safety interlock) to prevent the
product from being turned on by accident.
1.5.1.1 Without telescopic handle [ Fig. O5 ]:
1. Remove the protective cover
(5)
on both sides at the
(6) .
(7) (6)
of the blade .
17
28.07.22 11:42 28.07.22 11:42