JAROLIFT TDEP Serie Original Montage- Und Bedienungsanleitung Seite 33

Setting the upper end point
PROGRAM
PROGRAM
Move the motor in UP
direction to the desired
position.
Setting the LOWER end point
PROGRAM
PROGRAM
Move the motor in
DOWN direction to the
desired position.
2 sec.
PROGRAM
Press
PROGRAM
PROGRAM
Press the PROGRAM key
(approx. 2 seconds) until
LED 2 lights up.
2 sec.
PROGRAM
Press
PROGRAM
PROGRAM
Press the PROGRAM key
(approx. 2 seconds) until
LED 2 lights up.
SETTINGS
2 sec.
Press OPEN
PROGRAM
PROGRAM
Press the UP key for approx. 2
seconds.
The upper end point is now set.
2 sec.
Press DOWN
PROGRAM
PROGRAM
Press the DOWN key for
approx. 2 seconds.
The lower end point is now
set.
33