Haier XIB 6B2D3FB Bedienungsanleitung Seite 83

If the supply cord is damaged, it must be replaced by a Special cord
•
or assembly available from the manufactured or its service agent.
Only use the hose-sets supplied with the appliance for the water
•
supply connection (do not reuse old hose-sets).
Water pressure must be between 0.08 MPa and 0.8 MPa.
•
Make sure carpets or rugs do not obstruct the base or any of the
•
ventilation openings.
After installation, the appliance must be positioned so that the plug
•
is accessible.
The appliance must not be installed behind a lockable door, a sliding
•
door or a door with a hinge on the opposite side to that of the
washer dryer, in such way that a full opening of the washer dryer
door is restricted.
Do not leave the door open in a horizontal position, in order to avoid
•
potential dangers (e.g. tripping).
For further information on the product or to consult the technical
•
data sheet, please refer to the manufacturer's website.
For the maximum number of place settings, see the relevant data
•
plate attached to the product.
ELECTRICAL CONNECTIONS AND SAFETY INSTRUCTIONS
The technical details (supply voltage and power input) are indicated
•
on the product rating plate.
Make sure that the electrical system is earthed and complies with all
•
applicable laws, and that the socket is compatible with the plug of
the appliance.
The manufacturer declines all responsibility for any damage to
people or property due to non-earthing of the machine.
Ensure that the dishwasher does not crush power cables.
•
In general it is not advisable to use adaptors, multiple plugs and/or
•
extension cables.
WARNING. The appliance must not be supplied through an external
•
switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by a utility.
Before cleaning or maintaining the dishwasher, unplug the appliance
•
and turn off the water supply.
EN 83