Programme Selection And Special Features; On/Off Button; Changing Language - Haier XIB 6B2D3FB Bedienungsanleitung

PROGRAMME SELECTION AND SPECIAL FEATURES

ON/OFF BUTTON

To turn the appliance on and off, press the
•
ON/OFF button (for at least 3 seconds).
At the end of the cycle, remember to switch
off the appliance using the ON/OFF button,
then remove the plug and close the water
supply.
FIRST TIME YOU SWITCH ON THE
APPLIANCE
Connect the machine to the power supply.
•
Open the door, put the dishes to be washed
•
inside, and close the door again.
Press the "ON/OFF" button and hold for about
•
3 seconds.
In this phase only the "OPEN DOOR/
•
EXPRESS" "EXTRA DRY" and "START/ RESET"
buttons will remain active. The message
"HAIER" will appear on the display and all the
indicator lights will turn on for 3 secs.
The message "ENGLISH" will appear on the
•
display.
Pressing the "OPEN DOOR/EXPRESS" and
•
"EXTRA DRY" buttons you can select the
preferred language.
To accept the language selection press the
•
"START/RESET"
afterwards the "WELCOME" message will
scroll on the display once and the indicator
lights will all be off.
"ECO" will appear on the display.
•
Press "START/RESET" and a signal will sound,
•
the indicator light corresponding to the
selected programme will stay on and the wash
indicator light will come on.
Close the door (after an audible signal has
•
sounded, the
automatically).
WARNING
In the event that the machine remains
switched on without selecting or starting any
program, after 5 mins. the dishwasher will
switch off automatically.
Next time you switch on the appliance
Open the door.
•
Hold down the ON/OFF button for about 3
•
secs to turn the machine on and the "ECO"
button Immediately
programme will
programme or the programme you have
decided to use will appear on the display, saving
it when the dishwasher is switched on. (To save
the programme, see the specific paragraph
"Memorising the last programme used").
SETTINGS MENU
The dishwasher is regulated with certain factory
settings. Nevertheless, from the Settings menu,
you can adjust various parameters to suit your
washing requirements.
Entering the Settings menu
The dishwasher must ALWAYS be off before
you start this procedure.
Open the door.
•
Turn on the dishwasher by holding the
•
"ON/OFF" button down for about 3 secs.
Hold down the " PROGRAMME SELECTION "
•
and "ON/OFF" buttons for about 5 secs.
The message "SETTINGS" will appear on the
•
display and the indicator lights of the "OPEN
DOOR/EXPRESS" and "EXTRA DRY" buttons
will be on.
Pressing the " PROGRAMME SELECTION "
•
button you can select the parameters to be
adjusted in succession (SOFTENER 
BUZZER  MEMO FUNCTION).
Parameter adjustment is performed by
•
pressing the "OPEN DOOR/EXPRESS" and
"EXTRA DRY" buttons.
To adjust the SOFTENER see the specific
•
Chapter of the manual).
To adjust the BUZZER see the specific
•
paragraph).
To adjust the MEMO FUNCTION see the
•
specific paragraph).
start

CHANGING LANGUAGE

Press the "DELAY START" and "EXTRA DRY"
•
buttons together for 3 seconds.
"ENGLISH" appears on the display.
•
Pressing the "OPEN DOOR/EXPRESS" and
•
"EXTRA DRY" buttons you can select the
preferred language.
To accept the language selection press the
•
"START/RESET" button
EN 103