Maintenance And Cleaning; Avoiding Bad Odours; Protecting The Plastic Surfaces - Beko GN163022S Bedienungsanleitung

6

Maintenance and cleaning

Cleaning your fridge at regular intervals will
extend the service life of the product.
B
WARNING:
cleaning it.
substances for cleaning purposes.
household cleaners, detergent and wax polish
for cleaning.
litre of water. Soak a cloth with the solution and
wrung it thoroughly. Wipe the interior of the re-
frigerator with this cloth and the dry thoroughly.
ing and other electrical items.
period of time, unplug it, remove all food inside,
clean it and leave the door ajar.
If not, clean them.
its contents.
Remove the door shelves by pulling them up.
After cleaning, slide them from top to bottom to
install.
Never use cleaning agents or water that
contain chlorine to clean the outer surfaces
and chromium coated parts of the product.
Chlorine causes corrosion on such metal
surfaces.

6.1 Avoiding bad odours

Materials that may cause odour are not used in
the production of our refrigerators. However, due
to inappropriate food preserving conditions and
not cleaning the inner surface of the refrigerator as
required can bring forth the problem of odour. Pay
attention to following to avoid this problem:
Refrigerator / User Guide
Unplug the product before
-
Food residuals, stains, etc. can cause odour.
Therefore, clean the refrigerator with bi-
carbonate dissolved in water every few months.
Never use detergents or soap.
Microorganisms spreading out from uncovered
containers can cause unpleasant odours.
dates and spoiled in the refrigerator.

6.2 Protecting the plastic surfaces

Do not put liquid oils or oil-cooked meals in your
refrigerator in unsealed containers as they damage
the plastic surfaces of the refrigerator. If oil is
spilled or smeared onto the plastic surfaces, clean
and rinse the relevant part of the surface at once
with warm water.
35 / 37 EN