Salicru BM-R 3 kVA Bedienungsanleitung Seite 23

4. OVERVIEW.
4.1. VIEWS.
4.1.1. Equipment front views.
Fig. 1 and 2 show the corresponding illustrations of the rack
mounting manual bypass, ready to be installed in 19" rack cabi-
nets, although the 3 kVA model allows wall mounting installa-
tion too see section 6 installation.
14
Fig. 1. Front view of the 3kVA rack mounting manual
bypass.
14 11 12
Respect the phase and neutral rotation,
there will be a short-circuit
pass switch will be switched.
Fig. 2. Front view of the 6 and 10kVA rack mounting manual
bypass.
USER'S MANUAL
7
4 8 3 2
6 13
9 8
otherwise
when the manual by-
4.1.2. Corresponding legend of the equipment's views.
1 AC power supply IEC connector or input terminals.
2
To be connected to the UPS or stabilizer input.
3 To be connected to the UPS or stabilizer output.
4
IEC connectors or output terminals to loads.
5 Main protective earth (6 and 10 kVA models only).
6 Input circuit breaker switch (6 and 10 kVA models only).
7 Output thermic switches (2 sections in the 3 kVA model).
8 Manual bypass switch (Normal or Bypass positions).
9 Manual bypass signal auxiliary contact for signalling.
10 Terminal strip to connect with the EBMS signal of the UPS.
11
Protection cover for terminal power strip.
1 14 12 Cable gland for connection cables.
13
Manual bypass switch cover.
14 Angle support and screws to adapt the device to 19" rack
format.
4.2. PRODUCT DEFINITION.
14
4.2.1. Nomenclature.
BM-TWIN PRO2-RT2-6 2/2
10
Output voltage.
Input voltage.
Power.
Series.
Manual bypass acronym.
7
BM-R Rack mounting manual bypass