Packaging - Salicru Bm-R 3 Kva Bedienungsanleitung

3. QUALITY ASSURANCE AND STANDARDS.
3.1. STATEMENT BY THE MANAGEMENT.
Our goal is customer satisfaction, therefore this Management
has decided to establish a Quality and Environment Policy,
through the implementation of a Quality and Environmental
Management System that will enable us to comply with the
requirements demanded in the
also by our Customers and Stakeholders.
Likewise, the management of the company is committed to the
development and improvement of the Quality and Environmental
Management System, through:
Communication to the entire company of the importance of
•
satisfying both the client's requirements as well as legal
and regulatory requirements.
The dissemination of the Quality and Environment Policy
•
and the setting of the Quality and Environment objectives.
Conducting reviews by the Management.
•
Providing the necessary resources.
•
3.2. STANDARDS.
The Manual Bypass
commercialized in accordance with the standard
of Quality Management Systems and certified by SGS body.
The marking shows the conformity to the EEC Directive by
means of the application of the following standards:
2014/35/EU. - Low Voltage Directive (LVD).
•
2011/65/EU. - Restriction of Hazardous Substances in elec-
•
trical and electronic equipment (RoHS).
The manufacturers responsibility is excluded in the
event of any modification or intervention in the product
by the customer's side.
Declaration of conformity CE of the product is at the
client disposal under previous request to our headquar-
ters offices.
3.3. UKCA PRODUCT MARK AND UK AUTHORIZED
REPRESENTATIVE.
UK CA product marking indicates that this UPS has been
evaluated by Salicru and is deemed to comply with safety,
health and environmental protection requirements.
The UK CA Declaration of Conformity is available upon request.
For copies of of the UKCA Declaration of Conformity, please
contact Salicru or check our website: www.salicru.com
UK Authorised Representative
Indele Limited
7 Bell Yard,
WC2A 2JR,
London
6
ISO 9001 and ISO 14001
product is designed, manufactured and
EN ISO 9001
3.4. ENVIRONMENT.
This product has been designed to respect the environment and
manufactured according to
Recycling of the equipment at the end of its useful life:
and
Our company undertakes to use the services of authorized and
regulatory companies to treat the set of products recovered at
the end of their useful life (contact your distributor).

Packaging:

For the recycling of the packaging there must be compliance
with the legal requirements in force, according to the specific
regulations of the country where the equipment is installed.
ISO 14001.
SALICRU