Accessories - Siemens SIMATIC NET SCALANCE PSP9230PoE Kompaktmontageanleitung

3

Accessories

Component
M12 plug
Component
M12 connecting cable
M12 connecting cable
M12 connecting cable
M12 connecting cable
M12 connecting cable
M12 connecting cable
M12 connecting cable
4 Installation
WARNING
The device may only be operated in an environment of contamination class 1 or 2 (see EN/IEC 60664-1, GB/T 16935.1).
WARNING
Fire hazard
The device housing can heat up very strongly during operation and thus ignite flammable substances in case of
direct contact.
Do not mount the device on a flammable surface.
WARNING
Restricted access area
Operate the device including the power supply units in a "Restricted access area" according to IEC 62368-1.
4.1 Introduction
Like all devices in the SCALANCE XP-200 product group, the SCALANCE PSP9230PoE has degree of protection IP65 and is
intended for operation outside a control cabinet. A SCALANCE XP208 can be mounted directly on the SCALANCE PSP9230PoE
For mounting a SCALANCE XP216, two adapter plates are included with the SCALANCE PSP9230PoE.
Power supply of the SCALANCE PSP9230PoE
A5E51309689-AA, 02/2023
Description
M12 plug, S-coded, for connection to four-core cables with a
diameter of 6 ... 8 mm.
1 unit per pack
Description
Preassembled cable with two M12 plugs, L-coded, length:
0.5 m, 1 unit per pack
Preassembled cable with two M12 plugs, L-coded, length: 1
m, 1 unit per pack
Preassembled cable with two M12 plugs, L-coded, length:
1.5 m, 1 unit per pack
Preassembled cable with two M12 plugs, L-coded, length: 2
m, 1 unit per pack
Preassembled cable with two M12 plugs, L-coded, length: 5
m, 1 unit per pack
Preassembled cable with two M12 plugs, L-coded, length: 10
m, 1 unit per pack
Preassembled cable with two M12 plugs, L-coded, length: 15
m, 1 unit per pack
English
Article number
6GK1907-0DC00-6AA4
Article number
6XV1801-6DE50
6XV1801-6DH10
6XV1801-6DH15
6XV1801-6DH20
6XV1801-6DH50
6XV1801-6DN10
6XV1801-6DN15
17