Camera Reset - Instar In-9420 2K+ Bedienungsanleitung

8. Camera Reset

In order to reset your camera, please follow the instructions below:
1. Keep pressing the reset button for 20 seconds
2. After the reset, the camera will restart, which can take up to 60 seconds. All
data in the camera will be reset to factory defaults. Therefore, it is necessary to
do all settings in your camera again. For more information on how to install your
camera again, please visit: https://install.instar.com. Once you connect the
camera to the network, use the INSTAR Camera Tool to find out the camera's IP
address and open the camera's WebUI to start configurating your camera again.
Keep pressing for
20 seconds
12-EN
Go to http://install.instar.com