Instar IN-9420 2K+ Bedienungsanleitung Seite 29

5.2. Wall Mount Installation
Fig. 1
Step 1:
Please loosen the bottom
screw of the wall mount bracket as
shown above in Fig.1.
Fig. 3
Step 3:
Use the included screws
and dowels and mount the metal
plate on the wall.
Step 5:
Attach the wall-mount to
the metal plate on the wall. Once
attached, please tighten the screw
at the bottom of the wall-mount.
Go to http://install.instar.com
Fig. 2
Step 2:
Slide the metal plate to-
wards the bottom of the wall
mount bracket and take out the
metal plate.
Fig. 4
Step 4:
Put the extension cable
through the wall, and then cross
through the wall-mount bracket as
shown in the Fig.4.
Fig. 5
8-EN