Agilent Technologies TwisTorr 84 FS PCB 24 Bedienungshandbuch Seite 197

Serial Communication Windows
Tab. 8
WIN TYPE R
000 L X
001 L X
008 L X
100 L X
101 N X
102 N X
103 N X
104 L X
105 N X
107 L X
108 N X
109 L
111 N X
120 N X
121 N X
TwisTorr 84 FS PCB 24 Vdc Controller User Manual / 87-901-039-01 (B)
W Description
X START/STOP (1= START ; 0= STOP)
X SPEED SELECTION ACTIVE [0=HS / 1=LS]
X REMOTE/SERIAL Configuration (1= Remote ; 0= Serial)
X SOFT START YES/NO (1= YES ; 0= NO)
Default = 0
X SET POINT TYPE (0 =Frequency; 1=Current; 2=Time)
Default = 0
X SET POINT VALUE [Hz, Ma, SEC]
Default = 1000 Hz
X SET POINT MASK TIME [s]
Default = 0
X OUTPUT STATE (0= OFF if Val > threshold; 1 = ON if Val > threshold
Default = 0
X HYSTERESIS IN THRESHOLD % [0-100]
Default = 2
X ACTIVE STOP (0=NO; 1=YES)
Default = 1
X BAUD RATE (3-4) [4800-9600]
Default = 4
X PUMP LIFE RESET [Write "1" to Reset]
X SET ANALOG OUTPUT TYPE [0=Power; 1=Current]
Default = 0
X SET ROTATIONAL FREQUENCY [Hz] 1100 Hz < = F_imp < = FMAX
X MAX SETTABLE ROTATIONAL FREQUENCY [Hz] F< 1350 Hz
Technical Information
Example
197/210
17