Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DESCRIPTION OF THE DEVICE
(1) Power supply
(2) Fuse
(3) On/Off switch
(4) Housing
INSTALLING/REPLACING THE ILLUMINANT
DANGER! Electric shock caused by high voltages
Within the device there are areas where high voltages may be present. Always disconnect the
device from the mains socket prior to installing or replacing a lamp.
WARNING! Risk of burns at the surface and in case of inappropriate handling of the
illuminant
The device and the illuminant become very hot during operation. Let the device cool down for at
least 5 minutes before replacing the illuminant.
The device is supplied without illuminant. For the installation, you need the following lamp:
OMNILUX UV-Lamp 400W E-40
Do not install illuminants with a higher wattage! Illuminants with a higher wattage generate temperatures the
device was not designed for. Damages caused by non-observance are not subject to warranty. Observe the
safety instructions of the illuminant manufacturer.
1
2
3
4
5
6
(5)
UV lamp
(6) Protective grille
(7) Fixation screw
(8) Mounting bracket
Item no. 89514005
13/16
7
8
00124196, Version 4.0
Werbung
Inhaltsverzeichnis
