Miele COMPLETE C3 SGJP3 Gebrauchsanweisung Seite 53

It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the va-
cuum cleaner.
 Open the air inlet valve on the handle
far enough to reduce the suction
power.
The floorhead will be easier to man-
oeuvre.
During vacuuming
 When vacuuming, pull the cleaner be-
hind you on its wheels. You can stand
it upright for vacuuming stairs and
curtains etc.

When vacuuming – especially in
the case of fine dust, e.g. sawdust,
sand, flour, talcum powder, etc. –
electrostatic charges build up natur-
ally. Under certain conditions these
charges will be released. To avoid
the unpleasant effects of these elec-
trostatic discharges, a metal inlay
has been incorporated into the un-
derside of the handle. Please make
sure that you keep your hand in con-
stant contact with this metal strip
during vacuuming. If your vacuum
cleaner is fitted with an Eco Com-
fort handle, make sure that your
hand is in contact with the top,
arched part of the handle at all times.
This is where the metal inlay is incor-
porated (dia. 31, 32 + 33).
Interrupting operation (dia. 28)
(for models with radio controls on the
handle)
The vacuum cleaner can be paused for
short breaks whilst vacuuming.
 Press the Standby button  on the
handle.

The Standby button is designed
to pause the vacuum cleaner for
short periods of time whilst vacuum-
ing. There is a risk of overheating
and damage.
An LED will indicate each time a button
is pressed on the handle.
At the end of the pause you have 3
choices:
 Press the Standby button  again.
The vacuum cleaner will switch on us-
ing the previously selected setting.
 Press the + button.
The vacuum cleaner will switch on us-
ing the highest setting.
 Press the - button.
The vacuum cleaner will switch on us-
ing the lowest setting.
Illuminating the work area (dia. 34)
(for models with the LED handle)
Your vacuum cleaner is equipped with
an LED on the handle to illuminate the
work area.
 Press the  button on the LED
handle.
The lighting will switch itself off auto-
matically after approx. 30 seconds.
en
53