Miele COMPLETE C3 SGJP3 Gebrauchsanweisung Seite 48

en
c Silence AirClean 50 (grey)
d Active AirClean 50 (black)
e HEPA AirClean 50 (white)
If your vacuum cleaner is fitted with fil-
ter c, d or e, you need to activate the
timestrip® filter change indicator.
 Press the release catch for the dust
compartment lid and raise the lid as
far as it will go (dia. 09).
 Remove the indicator strip (dia. 10).
 Press the timestrip® filter change in-
dicator (dia. 11).
After approx. 10–15 seconds, a thin red
line will appear in the left-hand side of
the display (dia. 12).
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
How the exhaust filter timestrip®
change indicator works
The exhaust filter timestrip® change in-
dicator shows the remaining functional
life of the exhaust filter. After approx. 50
operating hours the display will be com-
pletely filled with red (dia. 13). 50 oper-
ating hours equates to approximately
one year of use.
48
Using the accessories supplied
(dia. 14)
 Crevice nozzle
For cleaning in folds, crevices or
corners.
 Dusting brush with natural
bristles
For cleaning skirting boards, as
well as ornate, carved or particu-
larly delicate objects.
The head can be swivelled to ad-
just the angle.
 Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, etc.
Some models are supplied as standard
with one of the following accessories
which are not illustrated:
– Turbobrush
– AllergoTeQ floorhead
These are supplied with their own oper-
ating instructions.
To open the accessories compart-
ment (dia. 15)
 Press the release button on the ac-
cessories compartment lid.
The accessories compartment will then
open.
 Take out the accessory you require.
 Press down firmly on the lid to close
it.