Checking The Cultivator; Checking The Controls - Stihl MH 600.1 Gebrauchsanleitung

English
► Adjust the engine speed using throttle
lever (1).
9.4 Engaging and Disengaging
Self-propulsion
9.4.1 Engage self-propulsion.
The clutch lever for self-propulsion is used to
engage or disengage the drive shaft when the
engine is running.
When the clutch lever for self-propulsion is actu‐
ated with the hoes attached and gear 1, 2 or R
engaged, the tiller moves.
► Start the engine.
► Press lock (1) to the stop and hold.
► Press clutch lever for self-propulsion (2)
quickly to the stop and hold.
► Release lock (1).
The drive is engaged and the drive shaft
rotates.
9.4.2 Disengaging Self-propulsion
► Release clutch lever for self-propulsion (1).
38
The drive is disengaged and the drive shaft
does not rotate.

10 Checking the Cultivator

10.1

Checking the Controls

Lock
► Stop the engine.
► Try to press the clutch lever for self-propulsion
without pressing the lock.
► If the clutch lever for self-propulsion can be
pressed: do not use the tiller and consult a
STIHL specialist dealer.
The lock is defective.
► Press the lock and hold.
► Press the clutch lever for self-propulsion.
► Release the clutch lever for self-propulsion
and lock.
► If the clutch lever for self-propulsion or lock is
stiff or does not spring back into the initial
position: do not use the tiller and consult a
STIHL specialist dealer.
The clutch lever for self-propulsion or lock is
defective.
Clutch lever for self-propulsion
► Start the engine.
► Set 1st, 2nd or reverse gear.
► Engage self-propulsion.
The drive is engaged and the drive shaft
rotates.
► If self-propulsion does not engage:
► Do not use the tiller and consult a STIHL
specialist dealer.
The clutch lever for self-propulsion is defec‐
tive.
Main switch
► Start the engine.
► Set the main switch to the 0 position.
The engine cuts out.
► If the engine does not cut out:
► Do not use the tiller and consult a STIHL
specialist dealer.
The main switch is defective.
Throttle lever
► Start the engine.
► Move the throttle lever.
The engine speed changes.
► If the engine speed does not change:
► Do not use the tiller and consult a STIHL
specialist dealer.
The throttle lever is defective.
Gear lever
► Engage 0, 1st, 2nd and reverse gear.
10 Checking the Cultivator
0478-404-9807-C