Unit With Suction System; High Pressure Hose And Spray Gun; Connection To The Mains Network - HBM Machines 10577 Bedienungsanleitung

STARTUP
4
STARTUP
Press the inlet valve inside the coating mate-
rial inlet (4) downwards before starting the
operation. This ensures that the valve is not
blocked or clogged.
4.1

UNIT WITH SUCTION SYSTEM

1. Ensure that the sealing surfaces of the connections are
clean.
2. Screw the lock nut (1) on the suction pipe (2) onto the
feed valve body (3) and tighten it by hand.
3. Insert the return line (4) into the quick connect fitting (5)
4.2

HIGH PRESSURE HOSE AND SPRAY GUN

1. Screw the high pressure hose (7) onto the hose connec-
tion(6)
2. Screw the spray gun (8) onto the high pressure hose
3. Tighten all union nuts on high pressure hose so that no
coating material can escape.
4. Screw the tip holder with the selected tip onto the spray
gun, align tip and tighten union nut.
4.3

CONNECTION TO THE MAINS NETWORK

Before connecting the unit to the mains supply, ensure that
the line voltage matches that specified on the unit's rating
label.
9