Ice Pre-Alert; Max/Min Weather Data; Adjust Brightness Of The Display And Night Mode - Bresser ClimateTemp NBF Bedienungsanleitung

HI ME LO
Temperature
range
Display
<11.0°C
11.0°C to 25.9°C Humidity ≤ 48%
26.0°C to 30.9°C
31.0°C to 40.9°C
> 41.0°C
Note:
The mould alarm is just a reference for you to monitor your living environment and remind you about
the risk of mould.

22 Ice pre-alert

1. When the outdoor temperature hits the range of -1 ° C to +2,9 ° C (30,2 ° F to 37,22 ° F) the ice
pre-alert symbol
2. The ice pre-alert symbol
range again.

23 MAX/MIN weather data

The maximum and minimum readings for indoor and outdoor temperature as well as for the humidity
are stored by the base station over a period of 24 hours:
1. Press the [DOWN] key several times to display the stored values one after the other.
2. Display sequence: Maximum values (MAX) > Minimum values (MIN) > Current values
3. When the maximum or minimum values are displayed, press the DOWN key for approx. 2 seconds
to irrevocably delete all stored values.
24 Adjust brightness of the display and night
mode
• In battery-powered operation, press the LIGHT/SNOOZE button to enable full display brightness
for about 15 seconds.
• In mains operation (DC 5V), press the SET button several times to set the desired display bright-
ness in 5 steps.
No risk Low risk
Without any dis- LO
play
At any humidity
value
49% ≤ Humidity ≤ 78%
Humidity ≤ 78%
Humidity ≤ 48%
At any humidity
value
will appear on the display, flashing continuously.
will disappear as soon as the outdoor temperature leaves this
Medium risk High risk
ME HI
(flashes every
second)
79% ≤ Humidity
79% ≤ Humidity ≤ 88% ≤ Humidity
87%
49% ≤ Humidity ≤ 88% ≤ Humidity
87%
15 / 36