Fuels / Settings; Fuels - Wamsler K 128 Aufstell- Und Bedienungsanleitung

If a chimney is not cleaned often enough, or if the wrong type of fuel is used (e.g. damp
wood) or the air flow is maladjusted the chimney may catch fire. In this case close the air

2. Fuels / Settings

2.1 Fuels

Low smoke, trouble-free operation of the stove and a supply of heat at the nominal level
with a chimney draught of 12 Pa are only guaranteed when you use the following fuels and
no others.
Only use natural, dry chopped firewood with a remaining humidity of max. 20% and lignite
(brown coal) briquettes.
Type of fuel
Lignite briquettes
Hardwood
Softwood
Non-permitted fuels include:
Rubbish, fine chips, pellets, bark, chips from planing, coal slack, damp wood or wood
treated with preservative, paper, cardboard or similar. For lighting use wood shavings or
barbecue lighters. Never use liquid fire starters!
The first time the stove is heated there may be some smoke and an unpleasant
smell. Make sure that the room is well ventilated (open windows and doors) and heat
for at least an hour at the maximum nominal heat load. If the maximum temperature
is not reached the first time the stove is heated, then there may be further
Maximum fuel quantities per load
Fuel
Lignite 3.2 kg (5-6 briquettes)
at nominal heat capacity
3.2 kg (5-6 briquettes)
for slow burning
Wood 2.0 kg (about 3 pieces)
All manuals and user guides at all-guides.com
Action in case of chimney fire!
supply to the fire chamber and call the fire brigade.
Never try to extinguish it yourself using water!
PLEASE NOTE:
unpleasant smells at a later date.
K118
Heat delivery in approx. kJ/kg
3.8 kg (6-7 briquettes)
at nominal heat capacity
3.8 kg (6-7 briquettes)
for slow burning
2.3 kg (about 3 pieces)
Table 1
35
19,500
15,900
11,500
K128 / K138