Herunterladen Inhalt Inhalt Diese Seite drucken

Charging The Battery; Inserting The Battery; Removing The Battery - Hilti NURON AG 6D-22-150 Original Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für NURON AG 6D-22-150:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Sound power level (L
WA
Uncertainty for the sound power level (K
Vibration information
Other applications, such as cutting, may produce vibration values that deviate from the given values.
Surface grinding with the vibration-absorbing side handle
(a
)
h,AG
Sanding with sandpaper with the vibration-absorbing side
handle (a
)
h,DS
Uncertainty (K)
6
Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
6.1

Charging the battery

1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 29
6.2

Inserting the battery

WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.
6.3

Removing the battery

1. Press the battery release button.
2. Remove the battery from the product.
6.4
Installing the Hilti retaining strap (optional)
When working with the product, you must comply with national regulations for working at heights.
Comply with the operating instructions of the retaining strap.
1. Position the two tabs of the retaining strap accurately on the spark guard.
2. Secure the retaining strap with the corresponding screws through the holes provided in the spark guard.
3. Insert the battery. → page 33
*2282185*
)
)
WA
2282185
B 22­55
B 22­255
B 22­55
B 22­255
6
96 dB(A)
3 dB(A)
AG 6D-22-150
6.2 m/s²
8.7 m/s²
2.5 m/s²
2.9 m/s²
1.5 m/s²
English
33

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis