Diagnostic Tools - Stauff Sltsd Bedienungsanleitung

Bedienungs- und Installationsanleitung
Installation- and Operation Instruction
Niveau-Temperaturschalter mit Display /
Level-Temperatur Switch with Display
You can invert the function of the LED for the respective switching output: The LED lights up if the contact
is opened, or in other words if the temperature falls below the minimum temperature, and the active LED
indicates an error.
Meas. value
Main menu meas. value

4.8 Diagnostic Tools

The device is able to journalize the events of a selected switching output. An event is defined as an LED
lighting up. Therefore, the recording of events depends on the settings for the switching function of the LED
(see chapter 4.7.7).
Settings and analysis are available in menu
Display
Measured values
NOTE
!
Only one switching output can be journalized. The respective switching output is selected in
menu item "switching output journalize alarm log"
Press to open the main menu.
Select menu item
Out X EF X
Settings OUTX
The following options are available:
LED = output;
the LED lights up if the PNP
switching output is closed.
Note:
- Recording of events depends on an activated LED lighting up (see chapter
Diagnostics 4.8).
Diagnostic
Menu diagnostics
using and .
This menu provides several diagnostic tools and journals of level and
temperature measurement.
Open
Now you can set diagnostic parameters or recall the journal.
LED Out X
Extenden functions
.
the menu
07/2013
Parameter
Behavior LEDX
LED = -output;
the LED lights up if the PNP
switching output is opened.
using .
39