Settings Of The Switching Output X - Stauff Sltsd Bedienungsanleitung

Bedienungs- und Installationsanleitung
Installation- and Operation Instruction
Niveau-Temperaturschalter mit Display /
Level-Temperatur Switch with Display

4.7 Settings of the Switching Output X

All switching outputs are set in a similar way. Therefore, the number of the switching output is marked "X".
Select the desired switching output by opening the respective main menu
Display
Measured value
Sub-menu Extended Functions
output (e.g. hysteresis, window or frequency output). Furthermore, the output can be tested as well.
Press to enter the main menu.
Select menu item
Further switching outputs are assigned to level or temperature measurement in the same way as switching
output 1.
Follow the same steps as described for switching output OUT 1.
Temperature
Main menu temperature
provides further settings defining the switching characteristics of the
using and .
Open the
Now the parameter for the switching output can be set.
Select menu item
Now the parameters for switching output 1 can be set. Select each menu item
using
switching point (SP1), reset point (rP1), Extended Functions (EF1).
Out 1
Settings for OUT 1
menu by
using and and open the main menu with
07/2013
pressing
and
.
.
:
34