Changing General Settings; Setting Unit For Temperature Measurement - Stauff Sltsd Bedienungsanleitung

Bedienungs- und Installationsanleitung
Installation- and Operation Instruction
Niveau-Temperaturschalter mit Display /
Level-Temperatur Switch with Display

4.6 Changing General Settings

In menu Basic Settings Extended Functions (
display of values as well as the options in menu Temperature. This menu provides assignment of
switching outputs (if equipped) as level or temperature measurement as well.
Display
Measured value
Press to open the main menu.
Select menu item
NOTE
!
If you have changed the assignment of the switching outputs or other general settings,
please check all parameters in menu Temperature.
You can reset all parameters to factory settings by using the reset function (

4.6.1 Setting unit for Temperature Measurement

In this menu, the unit for temperature is set.
Basic EF
Basic ext. functions
Parameters:
[°C, °F]
Basic EF
Basic ext. functions
using and .
Parameter
Set Unit Temp
Unit temperature
In this menu you can select the temperature unit.
Select the setting with keys
The device returns to the sub-menu.
The following units are available:
degree Celsius
Note:
- If the unit is changed, all related values as settings of the switching points
are re-calculated.
) general settings are made. These settings affect the
and
07/2013
).
and accept the it with key
degree Fahrenheit
31