Key Functions - Stauff Sltsd Bedienungsanleitung

Bedienungs- und Installationsanleitung
Installation- and Operation Instruction
Niveau-Temperaturschalter mit Display /
Level-Temperatur Switch with Display

4.3 Key Functions

The device is operated by a 3 button key pad below the display.
Please refer to the chapters below for detailed descriptions.
Key Operation Mode:
- Normal mode:
- Within the menu:
- At the end of the menu:
- After editing / selecting:
- Normal mode:
- Within the menu:
- Normal mode:
- Within the menu:
- Within the menu:
+ *
- Within the menu:
+ *
- Within the menu:
60 s no action *
* Changed values are not stored if you exit the menu this way.
To select a menu item and to change a parameter value, follow the steps:
Open the main menu with
Select the sub-menu using
If applicable, select the next sub-menu using
Select the menu item using
Change the value using
stored and the device returns to the sub-menu.
Exit the sub-menu by selecting menu item EXIT and press
subordinate menu or to the measurement display, respectively.
Function
switching the display; example:
calls a sub-menu
exits the sub-menu
(Exit) indicates the end of the menu
accept and store the entered value or selection
displays configuration
scrolls up menu item or selection, increases the
displayed value. Holding the key changes the value
continuously.
calls the main menu
scrolls down menu item or selection, decrease the
displayed value. Holding the key changes the value
continuously.
exits the main or sub-menu and returns to normal
mode
exits the sub-menu
exits the main or sub-menu
.
and and press to open the selected menu.
and
and and press
and and press to accept the changing. The changed parameter is
07/2013
( )
and press to open it.
to show the parameter list or parameter value.
. The device returns to the
29