Safety Regulations; Proper Use; Technical Data - EINHELL DRS 200/2 Bedienungsanleitung Und Wartungsanleitung

Anleitung_DRS_200_2_SPK1:_
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety regulations

CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Take suitable precautions to protect yourself and
your environment from potential hazards.
Never put the ratchet screwdriver to any use
other than that intended. Keep pneumatic tools
safe from children.
Always concentrate while you work. Do not work
if you are tired.
Use only a quick-release coupling to connect up
the air supply.
It is imperative to use a pressure reducer to set
the working pressure.
Never use oxygen or combustible gases as an
energy source.
Always disconnect the tool from the air supply
before carrying out any repairs or maintenance
work.
Use only original replacement parts.
Never allow the tool to run unloaded at full idle
speed.
Wear the necessary protective clothing when
working with the ratchet screwdriver.
Wear ear-muffs and goggles!
2. Layout (Fig. 1)
1 plug-in nipple for the air supply
2 trigger lever
3 ratchet head
8
22.01.2009 11:31 Uhr Seite 8

3. Proper use

The ratchet screwdriver is a handy pneumatic tool for
use in DIY and automotive workshops. It is ideal for
fastening and releasing threaded connections on
motor vehicles (wheels etc.) and on farming
equipment.
Note the required torques when tightening screws
and nuts. If necessary, use a torque wrench.
The drive sockets and bits can be changed quickly
and easily. The air supply is connected by means of
a plug-in nipple and a quick-release coupling.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.

4. Technical data

Release torque max.:
Working range (max. thread size):
Permissible working pressure max.:
Idle speed:
Sound power level L WA :
Sound pressure level L pA :
Vibration a w :
Weight:
Square drive:
Air consumption: approx. 115 l/min
Recommended hose diameter internal:
61 Nm
M10
6.3 bar
150 min
-1
93.8 dB(A)
104.8 dB(A)
3.32 m/s 2
1.2 kg
1/2 inch
Ø 10 mm