Inhaltsverzeichnis
Werbung
Before You Start
Tools
If required, most of our products are supplied with basic tools,
which will enable you to successfully assemble your product.
However, you may find it beneficial to have a soft-headed hammer
and perhaps an adjustable spanner handy as this may help.
Prepare the Work Area
It is important that you assemble your product in a clean, clear,
uncluttered area. This will enable you to move around the product
while you are fitting components and will reduce the possibility of
injury during assembly.
Work with a Friend
You may find it quicker, safer and easier to assemble this product
with the help of a friend as some of the components may be large,
heavy or awkward to handle alone.
Open the Carton.
Carefully open the carton that contains your product, taking note
of the warnings printed on the carton to ensure that the risk of injury
is reduced. Be aware of sharp staples that may be used to fasten
the flaps as these may cause injury. Be sure to open the carton the
right way up, as this will be the easiest and safest way to remove all
the components.
Unpack the Components
Carefully unpack each component, checking against the parts list
that you have all the necessary parts to complete the assembly of
your product.
Please note that some of the parts may be pre-fitted to major
components, so please check carefully before contacting our
CUSTOMER SUPPORT team.
In any event, please do not return the product to your retailer
before contacting us first.
4
Werbung
Inhaltsverzeichnis
