Inhaltsverzeichnis
Werbung
Exercise Monitor Instruction
F-1
F-2
F-3
F-4
F-5
6. Custom program (U1-U3)
6.1 In the standby mode, press the program key until (U1, U2, U3) appears.
6.2 Press the MODE button to set the time for U1, U2 or U3.
6.3 Press the MODE button again and enter it by means of direct selection buttons
for speed or incline, the desired speed and incline.
The input range for the time 5 to 99.00 minutes.
6.4 Press the MODE button again to go to the next 10 segments.
You must program all 10 segments so that "OK", your custom program is saved.
During the training in the user program the display changes every 5 seconds from
the slope to the speed and their individual program levels are displayed.
7. Troubleshooting
Error-
Basic
code
E01
Incorrect connection
between console and
voltage transformers
E03
Inverter under voltage 1. The voltage is too low to operate the unit. Ensure that the supplied
Sex
01
Age
Height
Weight
Body fat value
Body fat value
=(20---25)
Body fat value
=(26---29)
Body fat value
Solution
1. Check whether the cable from the console to the voltage transformer
is correctly connected.
2. If the cable is connected correctly, the console is defective.
Exchange it out.
voltage is normal.
2. Normal phenomenon after power failures
33
Male
02
Female
10------99
100----200
20-----150
≤19
underweight
Normal weight
overweight
≥30
obesity
Werbung
Inhaltsverzeichnis
