Inhaltsverzeichnis
Werbung
1.
Console
2.
Button Functions
2.1 START: Starts the unit.
2.2 STOP: Stops the unit.
2.3 "PROG": PROGRAM button: Selects the programs (P1, P2, ..., P24) in standby mode.
2.4 MODE button: Selects the countdown modes H1-H3 in the setting mode (time countdown,
distance countdown, calorie countdown). When you have selected a mode,
use the SPEED +/- buttons to set the desired values. Then, press
START button to start.
2.5 "SPEED +": Increases the running speed by 0.1km / h. Holds held faster
to increase. Can also be used to set the parameters.
2.6 "SPEED-": Reduces the running speed by 0.1km / h. Pressed to hold faster
reduce. Can also be used to set the parameters.
2.7 Speed Shortcut buttons 3, 6, 9 and 12 adjust the running speed directly.
2.8 Slope Shortcut buttons 3, 6, 9 and 12 adjust the slope directly.
2.9 "INCLINE +" button increases the incline. Can also be used to set the parameters.
2.10 "INLCINE -" button decreases the incline. Can also be used to set the parameters.
3.
Programs
3.1 Pressing the PROGRAM button displays the speed display P1-P24.
In Run mode, it displays the speed between 1 - 20km / h.
3.2 Time Countdown Mode: Press the MODE button to enter the setting mode.
The time display flashes with the default value of 30:00 minutes. Press the
SPEED +/- buttons to adjust the time. The range is 5: 00-99: 00 minutes.
Press the START button to start. When the countdown arrives at 0:00,
the unit stops slowly.
Exercise Monitor Instruction
Instruction manual for the console
30
Werbung
Inhaltsverzeichnis
