Settings; Setting The Measuring Unit; Setting User Data - Sanitas SBG 58 Gebrauchsanweisung

8

Settings

Enter your personal information before us-
ing the scale.

Setting the measuring unit

• Press the [SET] button in standby mode.
"KG" flashes on the display.
• To set the measuring unit, navigate
through the options (KG, LB, ST) using
the and buttons.
• Press the [SET] button to confirm your
input.

Setting user data

You must enter personal user parameters in
order to measure your body fat percentage
and other physical data.
The scale has 10 user memory locations
which allows, for example, you and your
family members to save personal settings
and retrieve them later.
Degrees of activity
Selection of the degree of activity must refer
to the medium and long term.
Degree of Physical activity
activity
1 None.
2 Low: A small amount of light physical effort (e.g. short walks, light garden work,
gymnastic exercises).
3 Medium: Physical effort for 30 minutes at least 2 to 4 times a week.
4
High: Physical effort for 30 minutes at least 4 to 6 times a week.
5 Very high: Intensive physical effort, intensive training or hard physical work for at le-
ast one hour daily.
24
Press the [ON] button.
• Wait until the display shows "0.0".
• Press the [set] button to start changing
the settings. The first memory position
flashes on the display.
• Now you can enter the following set-
tings:
User data
Memory position
Body height
Age
Sex
Degree of activity
• Modifying values: Press
and hold for more rapid progress.
• Confirming entries: Press the [SET] but-
ton.
The scale is now ready for measurement.
The scale switches off automatically if no
other actions are performed.
All parameters must be entered before the
body fat and other values can be entered.
Parameters
1 to 10
100 to 220 cm
(3' 03" to 7' 03")
10 to 100 years
male ,
female
1 to 5
or or press