3. Installation
All dimensions in these chapters are given in
millimetres.
The minimum distances required for proper ventilation
can be found in chapter 3.2.2 V
3.1 Unpacking and positioning
WARNING! While unpacking, the packaging
materials (polythene bags, polystyrene pieces, etc.)
should be kept away from children and pets.
CHOKING HAZARD! RISK OF INJURY!
1. Unpack the appliance carefully. Dispose of the packaging
as described in chapter waste management.
2. Remove all packaging materials.
3. The accessories of your appliance can be protected from
damage due to transportation (adhesive tapes etc.).
Remove such tapes very carefully. Remove remains of
such tapes with a damp cloth using lukewarm water and
a mild detergent (see also chapter
MAINTENANCE
back of the appliance!
4. Install the appliance in a suitable position with an
adequate distance from sources of heat and cold.
5. If installation near a heat source is unavoidable, use a
suitable insulation plate or keep the following minimum
distances to the heat source:
). Never remove any components of the
87
.
ENTILATION
CLEANING AND