Intended Use; Power Supply - Makita GA7080 Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combinations, according to
EPTA-Procedure 01/2014, are shown in the table.

Intended use

The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model
GA7080
GA7081
GA7082
GA9080
GA9081
GA9082
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
GA7080 GA7081 GA7082
180 mm
7.2 mm
M14 or M16 or 5/8"
-1
8,500 min
509 mm 461 mm
6.3 - 6.1 -
6.8 kg 6.6 kg
For public low-voltage distribution
systems of between 220 V and 250 V
Only for model GA7082 / GA9082
Switching operations of electric apparatus cause volt-
age fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.20 Ohms it can be pre-
sumed that there will be no negative effects. The mains
socket used for this device must be protected with a
fuse or protective circuit breaker having slow tripping
characteristics.
Sound pressure Sound power level
level (L ) : (dB(A)) (L
pA
91
91
91
92
92
92
7 ENGLISH
GA9080 GA9081
230 mm
6.5 mm
6,600 min
509 mm
6.0 - 6.5 - 6.3 -
6.5 kg 8.6 kg 8.4 kg
/II
Uncertainty (K) :
) : (dB(A)) (dB(A))
WA
102
102
102
103
103
103
GA9082
-1
461 mm
6.2 -
8.3 kg
3
3
3
3
3
3