Operation; Menu Structure - EuroLite LED SCY-500 Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller and with a phantom-powered USB port for QuickDMX receivers.

Menu structure

Press the MODE button so many times until the desired function is indicated in the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode. Confirm with
ENTER. If you do not do so, the device goes back to the main functions after 10 seconds without saving your
settings. If you wish to go back to the main functions without saving your settings, press MODE.
Mode
DMX channel
Preset colors
Automatic mode
Sound control
Running speed in
automatic mode
Microphone sensitivity
for sound control
Color mic
Dimmer
Silent scene
DMX lost
Slave mode
IR remote control
Firmware version
Display
d001-512
23CH
d001-512
20CH
d001-512
9CH
Addr
d001-512
6CH
d001-512
4CH
d001-512
2CH
Stat 01 – 15
Auto Au 1 – 3
Soun So 1 – 3
SPEE SP 1-9
SEnS SE 1-9
r000-255
g000-255
Colo
b000-255
U000-255
diMM dI 1-dI 9
on
SILE
oFF
bLac
Hold
LoSt FuLL
Stat
Auto
SLAU SLAU
on
InFr
oFF
V1.0 V1.0
26/36
Function
23-channel mode and start address
20-channel mode and start address
9-channel mode and start address
6-channel mode and start address
4-channel mode and start address
2-channel mode and start address
Constant lighting in one of the 15 colors
Auto program 1-3
Sound program 1-3
Program running speed
slow > fast
Microphone sensitivity
low > high
Red 0-100%
Grün 0-100%
Blue 0-100%
White 0-100%
Total brightness
dark > bright
LEDs off if there is no music signal
LEDs remain on if there is no music signal
LEDs go off
Spot holds the last received signal
All LEDs 100% on
Pre-selected static color 01-15
Pre-selected auto program 01-03
Slave mode
IR remote control on
IR remote control off
Current firmware version number
00133158, Version 1.0