Pioneer AVH-P7500DVD Installationsanleitung Seite 7

Violet/white
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Connection method
1. Clamp the lead.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Blue (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
See the section "When connecting
with a back-up camera".
Power supply side
Ground side
2. Clamp firmly with
needle-nosed
pliers.
Parking brake
switch
Fig. 4
6