Installation; Installing The Hide-Away Unit; Din Front/Rear-Mount - Pioneer AVH-P7500DVD Installationsanleitung

Installation

Installing the hide-away unit

Mounting with Brackets
Tapping screw (4 × 12 mm)
Car mat or chassis
Drill 2 to 2.5 mm diameter holes.
Mounting with Velcro Tape
Thoroughly wipe off the surface
before affixing the velcro tape.
Velcro tape
(large)
Car mat or chassis
13
Screw
(4 × 8 mm)
Bracket
Fig. 10
Fig. 11

DIN Front/Rear-mount

This unit can be properly installed
either from "Front" (conventional DIN
Front-mount) or "Rear" (DIN Rear-
mount installation, utilizing threaded
screw holes at the sides of unit chas-
sis). For details, refer to the following
illustrated installation methods.
Before installing the unit
• Remove the frame and the hold-
er. (Fig. 12)
Pull out to remove the frame and then
loosen the screws (2 × 3 mm) to
remove the holder. (When reattaching
the frame, point the side with a groove
downwards and attach it.)
Holder
Screw (2 × 3 mm)
Frame
Fig. 12