3
Operation
The temperature cannot be adjusted in Fan Mode.
3.8
Setting timer
3.8.1
One-time ON/OFF timer
▶ Press the TIMER key repeatedly until the corresponding symbol
appears.
– ON timer: ON DAY
– OFF timer: OFF DAY
– ON and OFF timer: ON+OFF DAY
▶ Confirm with key.
The clock display starts flashing.
▶ Press the . or / key to set the desired ON/OFF time.
▶ Press the key again to save the setting.
The ON/OFF timer cannot be set at a secondary wired room controller.
3.8.2
Weekly ON/OFF timer
Setting timer
▶ Press the TIMER key until WEEK 1 appears in the display.
▶ Confirm with key.
▶ Press the . or / key to select the weekday.
▶ Confirm with key.
▶ Press the . or / key to set the desired ON time.
▶ Confirm with key.
▶ Press the . or / key to set the desired OFF time.
▶ Confirm with key.
Up to four times can be set.
▶ Repeat procedure every subsequent day of the week.
To delete the timer for the selected day:
▶ Press the DAY OFF key.
Activating the timer
▶ Keep pressing the TIMER key until WEEK 1 appears in the display.
The timer is now switched on. The unit is switched on or off at the
selected times and days.
Deactivating the timer
▶ Keep pressing the TIMER key until WEEK 1 disappears in the display.
To switch off the unit when the week timer is active:
▶ Briefly press K key.
The unit switches off until the next ON timer is reached.
▶ Hold the K key pressed for two seconds to switch off the unit and
deactivate the week timer.
Programming the switch-on delay
If week timer 1 is active and the ON time is to be delayed.
▶ Select week timer 1 with TIMER key.
▶ Press the DAY OFF key 2x until 1h appears on the display.
▶ Wait for a few seconds while the setting is saved.
The unit now starts the next activity cycle following a delay of 1 hour.
▶ Press the DAY OFF key 3x until 2h appears on the display.
The unit now starts the next activity cycle following a delay of 2 hours.
14
3.8.3
Weekly event timer
Setting timer
Up to 8 events can be set for each day to change the operating mode,
temperature and fan speed.
▶ Keep pressing the TIMER key until WEEK 2 appears in the display.
▶ Confirm with key.
▶ Press the . or / key to select the weekday.
▶ Confirm with key.
▶ Press the . or / key to select the setting time, main operating
mode, temperature or fan speed for the event.
▶ Confirm with key.
▶ Make the setting and press the key to confirm or the DAY OFF key
to delete the setting.
▶ Repeat the procedure to define additional setting periods for this
day.
▶ Follow the same procedure to program additional weekdays.
To delete the timer for the selected day:
▶ Press the DAY OFF key.
Defining the setting time
▶ Press the . or / key to adjust the time.
▶ Confirm with key.
Selecting the main operating mode
▶ Press the . or / key to select the main operating mode (
Table 17, [1], page 12) ).
▶ Confirm with key.
The fan speed cannot be adjusted in automatic and dehumidification
mode.
Setting the room temperature
▶ Press th . or / key to set the desired room temperature.
▶ Confirm with key.
Fan step
▶ Press the . or / key to adjust the fan step.
▶ Confirm with key.
The temperature cannot be adjusted in Fan Mode.
Activating the timer
▶ Press the TIMER key until WEEK 2 appears in the display.
The timer is now switched on. The unit will adjust itself automatically
on these selected times and days.
Deactivating the timer
▶ Press the Kor TIMER key for several seconds.
3.8.4
Additional settings for weekly timer
Provisionally disabling the timer
To disable the timer on selected days only:
▶ Press the TIMER key until WEEK 1 or WEEK 2 appears in the display.
▶ Press the key.
▶ Press the . or / key to select the weekday.
▶ Press the DAY OFF key.
The selected day is no longer displayed.
Logacool AC166i MS – 6721849825 (2023/03)