Setting Of The Temperature - Wolkenstein SFD540NF B W Bedienungsanleitung

NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.5
fresh or frozen food in the appliance. If you place food in the appliance
before it has reached its normal operating temperature, this food can
thaw and / or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait at least 4 - 6 hours
to ensure proper operation.
4. The settings of the temperature of the fridge can be adjusted manually. To do
this, turn the thermostat for the temperature to the desired setting. (s. chapter
4.5 S
ETTING OF THE TEMPERATURE
5. If operation was interrupted, wait at least 5 minutes before restart.
6. The appliance needs some time to balance temperatures when you have changed
the settings before or when you have stored additional food in the appliance.
The duration of this period of time depends on the range of the change, the
ambient temperature, the amount of food and the frequency of door-openings.
When you set the temperature of both the fridge and freezer, these aspects
should be taken into account.
7. Operate the appliance according to the instructions described in the following
chapters.

SETTING OF THE TEMPERATURE

).
) before you place any
).
69
CLEANING AND