WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
WARNING! Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. Never use a steam cleaner.
RISK OF ELECTRICAL SHOCK!
WARNING! Do not use hairdryers, electrical heaters or other
technical devices to accelerate the defrosting-progress. RISK OF
ELECTRICAL SHOCK!
Remove the contents from the fridge and put them into a cooling box.
1.
Switch off the appliance by turning the thermostat to position 0 / AUS /
2.
OFF and disconnect it from the mains or use a cut-off device.
Place a container in front of the appliance to catch the water.
3.
When the encrusted ice melts put some dry cloths into the freezer-
4.
compartment to hold the water back.
Do not use hot water to accelerate the defrosting operation.
5.
Remove the big pieces of ice first.
6.
Afterwards remove the small pieces of ice.
7.
Wipe and dry the appliance and door seals with dry and soft cloths.
8.
After cleaning leave the door open for some time to ventilate the appliance.
9.
6.2 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent person
only. If the LED-illuminant is damaged, please contact a qualified professional
(not covered by the guarantee).
NOTICE! This product contains a LED light source of energy efficiency class
G according to EU-Regulation 2019/2015.
6.3 Replacing of the power cord
DANGER!
The power cord must be replaced by a qualified and
authorized professional only.
31
Depending on model
88