Klarstein 10034712 Bedienungsanleitung Seite 34

EN
34
Cleaning the burner assembly
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling grate.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a
cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper
clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with
a new burner. Reinstall the burner, check to ensure that the Gas valve orifices are
correctly positioned and secured inside the burner inlet (venturi).
this side up
Storage
• Your Gas Bottle must be stored outdoors in a well ventilated area and must be
disconnected from your gas grill when not being used. Ensure that you are outdoors
and away from any sources of ignition before attempting to disconnect your gas
bottle from your gas grill.
• When you are using your gas grill after a period of storage, please ensure to check
for gas leaks and check for any obstructions in the burner etc. before using. Also
follow the cleaning instructions to ensure gas grill is safe.
• If gas grill is stored outdoors ensure to check that all areas under the front panel are
free from any obstructions (insects etc.) This area must be kept free as this may affect
the flow of combustion or ventilation air.