Jung FRWM200 Betriebsanleitung Seite 67

Alarm forwarding has not yet
taken place
If the alarm forwarding has not yet taken
place, you can stop the alarm directly on
the alarm-triggering device:
f Press the testing / stop button on
the device triggering the alarm.
5 Alarm is stopped and is not forwarded.
Alarm forwarding has already
taken place
If the alarm forwarding has already taken
place in a radio group, and you can iden-
tify the alarm-triggering device, proceed
as follows:
f Press the testing / stop button on
the device triggering the alarm.
5 Alarm on the triggering device and
forwarding devices is stopped.
Operating Manual: FRWM200 - Smoke Alarm Device with Radio Link
EN
If the alarm forwarding has already taken
place in a radio group, and you cannot
identify the alarm-triggering device, pro-
ceed as follows:
(1) Press the testing / stop button on a
device of a subgroup or shared radio
group.
(2) Alarm of the forwarding devices of
this group is stopped.
(3) Follow the same procedure for
other groups.
The alarm of the alarm-triggering
device can only be terminated
directly on the device in question.
Thus the fire location can be
located in case of fire.
(4) Press the testing / stop button on
the device triggering the alarm.
5 Alarm on the triggering device and
forwarding devices is stopped.
67