Jung FRWM200 Betriebsanleitung Seite 43

condensates leads to premature deterioration
of the optical properties of the measurement
components, which the device can compensate
through autonomous recalibration only within
its physical limits.
Moisture damage / corrosion
If the device, and in par ticular its elec-
tronics, are damaged by moisture of any
kind, any warranty claim shall be forfeited.
Moisture thus is not only the exposure to
fluid, but also regular, above-average ex-
posure of the device to humidity (> 70%).
Due to the effect of excessive humidity
(e.g., steam / roasting fumes), the battery
of the device is discharged above average,
and the battery life is shortened consid-
erably. Also, liquids and high humidity can
damage the electronics of the device by
causing corrosion.
Thermal damage
If the device has been exposed temporarily
or permanently to a temperature below 0°
C or above 70° C, any warranty claim shall
Operating Manual: FRWM200 - Smoke Alarm Device with Radio Link
EN
be forfeited. In particular, no warranty shall be
given for devices that were exposed to high
temperatures and fumes in a fire. Damage
to the device as a result of frost / cold, as
well as heat damage, shall not be covered
by the warranty.
Excessive load on the battery
If the smoke alarm device is operated in the
vicinity of other electronic, radio-based de-
vices, while the minimum distance between
such devices and the smoke alarm device
named in this manual is exceeded regularly
or permanently, this can lead to premature
battery consumption. Such improper use of
the device shall forfeit any warranty claim.
Excessive load on the battery capacity
through frequent triggering of alarm tones
(more than once a month), or repeated
changing / setting up of a radio group more
than four times in 12 years, and repeated
triggering of a radio group alarm signal more
than four times in 12 years, for more than
15 minutes each time, may lead to prema-
43