Display Of The Leds - GF SPC Betriebsanleitung

Type SPC positioner
Operating mode AUTOMATIC (Slide DIP switch 4 OFF)
LED1
LED2
ON DIP
1 2 3 4
S1/X-TUNE S2
LED1
LED2
ON DIP
1 2 3 4
S1/X-TUNE S2
LED1
LED2
ON DIP
1 2 3 4
S1/X-TUNE S2
5.3

Display of the LEDs

LED1
LED2
ON DIP
1 2 3 4
S1/X-TUNE
26
Button Function
1 Pressing and holding for 5 s starts the X.TUNE function
2 -
1 and 2 Longer than 10 s (< 30 s, LED 2 flashes at 5 Hz): Device restart
Longer than 30 s (LED 2 flashes at 10 Hz): Reset the device to factory settings
S2
No. Designation
1 LED 1 (RGB): Display of device status and valve position
2 LED 2 (green): Display of the bus status
Feedback when pressing the buttons to
start the functions
1
X.TUNE
•
Device restart
•
2
Reset to factory settings
•
Operating Instructions