GF SPC Betriebsanleitung Seite 11

Operating Instructions
NOTE!
Electrostatic sensitive components/assemblies!
The device contains electronic components that are sensitive to electrostatic discharge (ESD). Contact
with electrostatically charged persons or objects endangers these components. In the worst case,
they are immediately destroyed or fail after putting into operation.
► Take appropriate measures before touching the electronic components.
► Observe the requirements according to DIN EN 61340-5-1 to minimize or avoid the possibility of damage due to sudden electros-
tatic discharge!
► Do not touch electronic components when the operating voltage is present!
WARNING!
Solar radiation and temperature fluctuations can cause malfunctions or leaks.
► Protect product from sun and weather conditions when used outdoors.
► Observe permissible ambient temperatures.
WARNING!
For UL approved components, only circuits of limited power according to "NEC Class 2" may be used.
NOTE!
Observe the resistance of the materials!
Some of the SPC positioner materials are not acid resistant.
► Observe the media resistance of the materials.
Type SPC positioner
11