Operation; Description Of The Operating And Display Elements; Control Elements - GF SPC Betriebsanleitung

Operating Instructions
5

Operation

5.1

Description of the operating and display elements

► Unscrew the transparent cover of the type SPC positioner to operate the buttons and DIP switches.
NOTE!
Breakage of the pneumatic connecting pieces due to rotational effect.
► When unscrewing and screwing in the transparent cover, do not hold against the actuator of the valve, but against the basic
housing.
5.2

Control elements

LED1
LED2
ON DIP
1 2 3 4
S1/X-TUNE
► After setting the DIP switches, screw the transparent cover of the type SPC positioner back on.
CAUTION!
Damage or functional failure due to ingress of dirt and moisture.
► To comply with protection rating IP65/IP67, screw the transparent cover in as far as it will go.
1
2
3
4
5
S2
No. Designation
1 Transparent cover
2 Housing cover
3 Basic housing
4 Actuator
5 Valve
No. Designation
1 Communication interface
2 LED 1
1
3 LED 2
2
4 DIP switch
5 Button 2
3
6 Button 1
4
5
6
Type SPC positioner
23