Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
NOTE!
With assembly on process valves with linear stroke actuator type Diastar Ten, Ten Plus, Sixteen, as well as type 025, observe the
mounting instructions in the operating manual of the process valve.
CAUTION!
Do not apply pressure to the positioner during assembly!
Unpredictable actuation may result in injury or property damage.
► When assembling the positioner to actuator, the control air connections must not be connected.
4.1.3
Pneumatic connection with drive
1
2
3
4
5
► Establish pneumatic connection between type SPC positioner and actuator according to the following table.
Control function FC
Process valve closed in rest position (by spring resistance)
Type
Type SPC Positioner Control air outlet
Actuator
Control air inlet top
Control air inlet bottom
Dry area
Control function FO
Process valve open in rest position (by spring resistance)
Type
Type SPC Positioner Control air outlet
Actuator
Control air inlet top
Control air inlet bottom
Dry area
No.
Designation
1
Control air connection 2
2
Control air connection 2
6
3
Fixing screws max. 1.5 Nm
4
Control air connection top
5
Control air connection bottom
6
Type SPC Positioner
7
7
Actuator
8
Valve
8
Type SPC*
Type SPC
2
2
2
2
1
2
Type SPC*
Type SPC
2
2
2
2
1
2
Type SPC positioner
1
2
2
1
2
1
19
Werbung
Inhaltsverzeichnis
