Precautions For Use; Presentation; Delivery Condition; Accessories - Chauvin Arnoux PAC 25 Bedienungsanleitung

This instrument is compliant with the IEC/EN 61010‑2‑032 or BS EN 61010‑2‑032 safety standard for
voltages of 300 V with respect to earth in measurement category IV or 600 V in category III. Failure
to observe the safety instructions may result in electric shock, fire, explosion, and destruction of the
instrument and of the installations.
„ The operator and/or the responsible authority must carefully read and clearly understand the various
precautions to be taken in use. Sound knowledge and a keen awareness of electrical hazards are
essential when using this instrument.
„ Do not use the instrument on networks of which the voltage exceeds those mentioned.
„ Never exceed the protection limits stated in the specifications.
„ Observe the conditions of use, namely the temperature, the relative humidity, the altitude, the degree
of pollution, and the place of use.
„ Do not use the instrument if it seems to be damaged, incomplete, or poorly closed.
„ Before each use, check the condition of the insulation on the leads and housing. Any item of which the
insulation is deteriorated (even partially) must be set aside for repair or scrapping.
„ When handling the instrument, keep your fingers behind the physical guards.
„ Use suitable means of protection.
„ All troubleshooting and metrological checks must be performed by competent and accredited personnel.

1.1. DELIVERY CONDITION

PAC 25 and PAC 26 clamps are delivered in a cardboard box with:
„ one 9 V alkaline battery (type 6LF22, 6LR61, or NEDA 1604),
„ one user manual in 5 languages,
„ one multilingual safety data sheet,
„ a verification certificate.

1.2. ACCESSORIES

One 5 V, 1 A external power supply comprising:
„ one mains/USB type A adapter
„ one USB type A/micro‑USB type B cable
For the accessories and spares, consult our web site:
www.chauvin‑arnoux.com

PRECAUTIONS FOR USE

1. PRESENTATION

24