Maintenance And Cleaning - Westfalia WFSP400 Originalanleitung

Special cleanup
(must have a flashpoint above 21º C):
• Always flush spray gun outside.
• Area must be free of flammable vapors.
• Cleaning area must be well-ventilated.
Do NOT submerge the compressor unit in liquids of any kind!
1. Unplug the spray gun, and trigger the spray
gun so that the material inside the spray gun
flows back into the container.
2. Unscrew the container. Empty any remaining material back into the
material container.
3. Pour a small amount of the appropriate cleaning solution into the container.
Clean container and properly dispose of cleaning solution.
4. Refill the container with NEW cleaning solution.
5. Attach the container to the gun and plug
in the sprayer.
6. Spray the solution through the gun for
two seconds in a safe area. Spray again
for two seconds. Unplug the spray gun,
and trigger the spray gun so that the
material inside the spray gun flows back
into the container.
7. Wipe the exterior of the container and
gun until clean.

Maintenance and Cleaning

instructions for use with
23
flammable solvents