Cleaning; Intensive Cleaning; Maintenance And Care - Westfalia 92 85 76 Originalanleitung

Cleaning

When using water-soluble coating material, simply clean all parts of the air
spray gun thoroughly with water.

Intensive Cleaning


Please note that disassembling and intensive cleaning of the spray gun
are inevitable, as otherwise it can lead to debris and to a bad spray
result, if lacquer and priming coats are used as coating material.

Clean the spray gun and the paint container
after each use with appropriate paint thinners
or cleaning agents. Empty the contents. Fill a
little paint thinner into the paint container and
rinse it. Empty the paint container and repeat
the process with clean paint thinner. Spray the
clean paint thinner in short strokes.

During cleaning please always wear a respira-
tor mask and solvent-resistant gloves! Also
wear eye protection, as splashes of solvents
can cause injuries of your eyes.

Never put the paint spray gun into solvents for a longer period of time
or overnight.

Never use hard or sharp objects to remove paint residues. The nozzle
must always be kept clean. Debris of dried paint can distort the paint jet
and damage the spray gun.

Rinse all parts well after intensive cleaning and dry the spray gun.
Assemble the gun. Fill a small amount of paint thinner into the paint
container and blow it with compressed air through the spray gun.

Maintenance and Care


To ensure proper functionality and a long
lifetime, diligent lubrication and maintenance
are essential.

Use a suitable silicone free grease to grease
all moving parts of the spray gun as well as
the thread of the paint flow regulator (8) and
the paint needle spring that is located behind
Operation
28
Air Piston Rod