Westfalia WFSP400 Originalanleitung Seite 26

 Keep a distance of 25 – 30 cm from the surface to be sprayed and spray
evenly from side to side or up and down. Do not spray at an angle as this
will lead to paint runs on the surface. Perform the spraying movement from
the arm and not from the wrist.
 Use smooth and even strokes. When spraying
large areas, use a criss-cross pattern as shown
on the right.
 Never start or stop the spray gun while it is
aimed at the surface to be sprayed.
 Evenly control the speed of the movement of
the spray gun. A fast movement over the
surface will give a thin coat. A slow speed
movement will give a heavy coat. Apply one
coat at a time. Make sure you observe the
manufacturer's recommended drying time before applying a further coat.
 Keep the output control at a low setting when spraying small areas. This
will avoid using too much paint and prevent overspray.
 Avoid stopping and starting when spraying an object. This can lead to too
much or not enough paint being applied.
Operation
Correct
Incorrect
22