Memory Full; Remote Access / Setting The Remote Access Pin Code; Remote Activation Of The Answer Machine - Swissvoice Aeris 214 Bedienungsanleitung

- Answer Delay - Select 2, 4, 6, 8 rings or Time saver mode
- Record Time - Set the maximum length for incoming messages
- Remote Acc. - Switch remote access on or off
- Compression - Set the desired recording quality (low compression=high recor-
ding quality)
- BS Screening - Incoming messages are played back over the handset.
- Change PIN - Change remote access PIN code (see below)
If you set the answer delay to Time Saver, your answer machine will answer
after 2 rings if you have new messages. If you do not have new messages it
will not answer until 6 rings. This enables you to save costs by hanging up
before you are connected.

Memory full

The recording capacity of your answer machine is 15 minutes (including outgoing mes-
sages). If the memory is full, TAM full appears on the handset display and FF flashes
on the base station display. No more messages can be recorded. The answer machine
switches to Answer only mode automatically. You must delete old messages.

Remote Access / Setting the remote access PIN code

Remote operation can only be performed using a valid remote access PIN code.
You must write over the default PIN code with any 4-digit PIN code (apart from 0000).
, select Ans. Machine and press OK.
• Press
Select TAM Settings and press OK.
•
Select Remote Acc. and press OK.
•
Select ON by pressing the navigation keys
•
• Enter the remote access PIN code (0000 on delivery) and press OK.
• Enter the new PIN code and press OK.
• Enter the PIN code again and press OK.

Remote activation of the answer machine

You can switch on your answer machine remotely.
• Dial your number.
• After 10 rings the TAM automatically answers.
Aeris 214 / 214T
†/π
and press OK.
Aeris 214 / 214T
35